聚酰胺-酰亚胺,PAI Torlon® AI-30 LM是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
良好粘结性, 耐磨蚀性, 水溶性, 耐化学性良好, 涂敷应用, 粘合剂
Torlon® AI-30 LM
聚酰胺-酰亚胺
Solvay Specialty Polymers
Technical Data
产品说明
Torlon® AI-30 LM is a wet polymer granule developed for the performance coatings industry. This polyamide-imide precursor consists of roughly 35% polymer solids, 63% water and 2% NMP. The high acid number of the polymer backbone allows the formulation of aqueous solutions with the addition of an appropriate complexing amine. Aqueous-based solutions made with Torlon® AI-30 LM have inherently low VOCs, which helps end users meet stringent environmental regulations.
Coatings based on the Torlon® AI-30 LM polymer yield durable, abrasion-resistant, thermally-stable films. The cured resin has superior resistance to organic solvents and a wide array of other commercial and industrial chemicals. Outstanding tribological characteristics are afforded both by the resin as well as its unparalleled intra-coat adhesion to fluoropolymers.
Aqueous-based AI-30 LM polymer coatings offer a sustainable solution for electrical/electronic, high temperature decorative and corrosion preventative applications. In addition, magnet wire insulation and protective coatings for printed circuit boards may be converted from solvent-borne (NMP) polyamide-imide solutions. Industrial applications include primers and decorative topcoats for cookware, appliances and housewares. Aqueous AI-30 LM polymer solutions may be easily combined with aqueous fluoropolymer dispersions to produce sustainable, high-performance, low-friction, corrosion-resistant coatings that provide protection to industrial and automotive parts.
总体
材料状态 • 已商用:当前有效
• Processing - Design Guide (English)
资料 1 • Processing - Injection (English)
• Technical Datasheet
搜索 UL 黄卡 • Solvay Specialty Polymers
• Torlon®
供货地区 • 北美洲 • 拉丁美洲 • 亚太地区
• 非洲和中东 • 欧洲
性能特点 • 良好粘结性 • 耐磨蚀性,良好 • 水溶性
• 耐化学性良好 • 耐热性,高 • 阻燃性能
用途 • 涂敷应用 • 粘合剂
RoHS 合规性 • 联系制造商
外观 • 黄色
形式 • 粉状
加工方法 • 溶液处理 • 涂层
物理性能 额定值 单位制
分子量
Mn 3500g/mol
Mw 11000g/mol
固体含量 35%
酸值 125.00mg KOH/g
补充信息
Solution Processing
Waterborne polyamide-imide solutions may be formulated using Torlon® AI-30 LM and an appropriate complexing amine. Please contact your Solvay representative for further details. Waterborne PAI solutions are patent protected (US 6,479,581).
Application
There are numerous methods by which waterborne Torlon® AI-30 LM resin-based coatings can be effectively applied. Depending on the aesthetic and performance characteristics required, uniform coatings can be applied by spray, roll, spin or curtain techniques. Usually, dry film thicknesses from 5-10 µm are readily achieved in a single coating pass, with multi-coat systems affording the opportunity for even further surface build. Regardless of the method employed, it is essential to assure appropriate preparation of the substrate prior to application of coating. Once complete, application equipment should be purged of the coating and cleaned with water.
Drying/Curing
Coatings based upon Torlon® AI-30 LM resin dry and initiate cure at temperatures as low as 150°C (300°F). However, optimal film properties result after heating for 5 to 20 minutes at 275°C (527°F), depending on the film thickness and the formulation. In the case of multi-coat systems, an intermediate temperature step at around 200°C (390°F) for 10 minutes may be advisable. For coating formulations employing low solids, a brief flash off period of about 3 to 10 minutes may be recommended prior to initiating cure.
聚酰胺-酰亚胺,PAI Torlon® AI-30 LM是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|