|
聚苯并咪唑,PBI Quadrant EPP CELAZOLE® PBI是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
Quadrant EPP CELAZOLE® PBI
Polybenzimidazole
Quadrant Engineering Plastic Products
Technical Data
Product Description
Celazole® is a registered trademark of PBI Performance Products.
General
Material Status • Commercial: Active
Literature 1 • Technical Datasheet (English)
Search for UL Yellow Card • Quadrant Engineering Plastic Products
Availability • Europe • North America
Recycled Content • Yes
Features • Good Chemical Resistance • Good Thermal Stability • High Heat Resistance
• Good Compressive Strength • Good Wear Resistance
• Aerospace Applications • Electrical Parts • Sealing Devices
Uses • Aircraft Applications • High Temperature Applications • Seals
• Bushings • Insulation Shield • Valves/Valve Parts
Appearance • Black
Forms • Customizable Forms • Preformed Parts • Sheet
• Disc • Rod • Tubing
Processing Method • Compression Molding
Physical Nominal Value (English) Nominal Value (SI) Test Method
Density 1.30 g/cm³ 1.30 g/cm³ ISO 1183
Water Absorption ISO 62
73°F (23°C), 24 hr, 0.118 in (3.00 mm) 0.50 % 0.50 %
Saturation, 73°F (23°C) 14 % 14 %
Water Absorption 3 ISO 62
73°F (23°C), 0.12 in (3.00 mm) 38.0 mg 38.0 mg
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus 841000 psi 5800 MPa ISO 527-2/1B/1
Tensile Stress (Break) 20300 psi 140 MPa ISO 527-2/1B/5
Tensile Strain (Break) 3.0 % 3.0 % ISO 527-2/1B/5
Compressive Stress ISO 604/1
2% Strain 11900 psi 82.0 MPa
1% Strain 6090 psi 42.0 MPa
Impact Nominal Value (English) Nominal Value (SI) Test Method
Charpy Notched Impact Strength 1.7 ft•lb/in² 3.5 kJ/m² ISO 179/1eA
Hardness Nominal Value (English) Nominal Value (SI) Test Method
Rockwell Hardness ISO 2039-2
E-Scale, 0.394 in (10.0 mm) 105 105
Ball Indentation Hardness ISO 2039-1
0.394 in (10.0 mm) 54400 psi 375 MPa
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Heat Deflection Temperature ISO 75-2/A
264 psi (1.8 MPa), Unannealed 797 °F 425 °C
Continuous Use Temperature
-- 4 590 °F 310 °C
-- 5 932 °F 500 °C
Glass Transition Temperature 797 °F 425 °C
CLTE - Flow
73 to 212°F (23 to 100°C) 1.4E-5 in/in/°F 2.5E-5 cm/cm/°C
73 to 302°F (23 to 150°C) 1.4E-5 in/in/°F 2.5E-5 cm/cm/°C
> 302°F (> 150°C) 1.4E-5 in/in/°F 2.5E-5 cm/cm/°C
Quadrant EPP CELAZOLE® PBI
Polybenzimidazole
Quadrant Engineering Plastic Products www.ulprospector.com
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Thermal Conductivity (73°F (23°C)) 2.8 Btu•in/hr/ft²/°F 0.40 W/m/K
Electrical Nominal Value (English) Nominal Value (SI) Test Method
Surface Resistivity > 1.0E+13 ohms > 1.0E+13 ohms IEC 60093
Volume Resistivity > 1.0E+14 ohms•cm > 1.0E+14 ohms•cm IEC 60093
Electric Strength (0.0394 in (1.00 mm)) 560 V/mil 22 kV/mm IEC 60243-1
Relative Permittivity IEC 60250
100 Hz 3.30 3.30
1 MHz 3.20 3.20
Dissipation Factor (100 Hz) 1.0E-3 1.0E-3 IEC 60250
Flammability Nominal Value (English) Nominal Value (SI) Test Method
Flame Rating UL 94
0.0591 in (1.50 mm) V-0 V-0
0.118 in (3.00 mm) V-0 V-0
Oxygen Index 58 % 58 % ISO 4589-2
聚苯并咪唑,PBI Quadrant EPP CELAZOLE® PBI是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
