聚醚醚酮,PEEK TECAPEEK® ST东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
TECAPEEK® ST
Polyetheretherketone
Ensinger Inc.
Technical Data
Product Description
TECAPEEK® ST is a multipurpose semi-crystaline material from the polyaryletherketone family based on PEKEKK that features improved mechanical properties at higher temperatures. The benefits of TECAPEEK® ST compared to standard TECAPEEK® are that of a higher heat distortion temperature (HDT), better strength and stiffness of machined components and a higher flexural strength combined with a higher glass transition point.
Target industries for TECAPEEK® ST are Oil and Gas, Semiconductor, Chemical and Automotive, crude petroleum extraction and drilling. Possible applications include turbocharger impellers, seal rings and other down hole parts, gears, and test sockets.
General
Material Status • Commercial: Active
Literature 1 • Technical Datasheet (English)
Availability • North America
• Electrically Insulating • Good Stiffness • Low Moisture Absorption
Features • Good Chemical Resistance • High Purity • Machinable
• Good Dimensional Stability • High Strength • Semi Crystalline
Uses • Automotive Applications • Oil/Gas Applications
• Gears • Seals
Forms • Shapes
Physical Nominal Value (English) Nominal Value (SI) Test Method
Specific Gravity 1.30 1.30 g/cm³ ASTM D792
Water Absorption (Equilibrium, 50) 0.050 % 0.050 % ASTM D570
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus 3 638000 psi 4400 MPa ASTM D638
Tensile Strength (Yield) 18900 psi 130 MPa ASTM D638
Tensile Strain (Yield) 11 % 11 % ISO 527-2
Impact Nominal Value (English) Nominal Value (SI) Test Method
Charpy Unnotched Impact Strength ISO 179
73°F (23°C) 4.3 ft•lb/in² 9.0 kJ/m²
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Deflection Temperature Under Load ASTM D648
264 psi (1.8 MPa), Unannealed 342 °F 172 °C
Glass Transition Temperature 324 °F 162 °C ASTM E1356
Peak Melting Temperature 729 °F 387 °C ASTM D3418
CLTE - Flow 2.7E-5 in/in/°F 4.9E-5 cm/cm/°C ASTM E831
Service Temperature - Long Term 500 °F 260 °C
Electrical Nominal Value (English) Nominal Value (SI) Test Method
Surface Resistivity > 1.0E+13 ohms > 1.0E+13 ohms IEC 60093
Volume Resistivity (73°F (23°C)) > 1.0E+15 ohms•cm > 1.0E+15 ohms•cm IEC 60093
Additional Information
Data obtained from extruded shapes material.
聚醚醚酮,PEEK TECAPEEK® ST是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|