聚醚酮酮,PEKK RTP 4185是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
RTP 4185
Polyetherketoneketone
RTP Company
Technical Data
Product Description
Warning: The status of this material is 'Commercial: Limited Issue'
The data for this material has not been recently verified.
Please contact RTP Company for current information prior to specifying this grade.
Carbon Fiber 30%
General
Material Status • Limited Issue
Literature 1 • Brochure - Design Guide (English)
Processing - Comprehensive Molding Guide (English)
•
Search for UL Yellow Card • RTP Company
• RTP
Availability • Africa & Middle East • Europe • North America
• Asia Pacific • Latin America
Filler / Reinforcement • Carbon Fiber, 30% Filler by Weight
RoHS Compliance • Contact Manufacturer
Forms • Pellets
Processing Method • Injection Molding
Physical Nominal Value (English) Nominal Value (SI) Test Method
Specific Gravity 1.39 1.39 g/cm³ ASTM D792
Molding Shrinkage - Flow (0.126 in (3.20 mm)) 1.0E-3 in/in 0.10 % ASTM D955
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus 3.70E+6 psi 25500 MPa ASTM D638
Tensile Strength 37000 psi 255 MPa ASTM D638
Tensile Elongation (Yield) 1.3 % 1.3 % ASTM D638
Flexural Modulus 3.50E+6 psi 24100 MPa ASTM D790
Flexural Strength 54000 psi 372 MPa ASTM D790
Impact Nominal Value (English) Nominal Value (SI) Test Method
Notched Izod Impact (0.126 in (3.20 mm)) 1.2 ft•lb/in 64 J/m ASTM D256
Unnotched Izod Impact (0.126 in (3.20 mm)) 10 ft•lb/in 530 J/m ASTM D4812
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Deflection Temperature Under Load ASTM D648
264 psi (1.8 MPa), Unannealed 600 °F 316 °C
Electrical Nominal Value (English) Nominal Value (SI) Test Method
Volume Resistivity 1.0E+6 ohms•cm 1.0E+6 ohms•cm ASTM D257
Flammability Nominal Value (English) Nominal Value (SI) Test Method
Flame Rating (0.0591 in (1.50 mm)) V-0 V-0 UL 94
Additional Information
Dew Point: -20°F
DTUL at 264 psi, ASTM D648: >600°F
Moisture Content: 0.1%
Volume Resistivity, ASTM D257: <1000000 ohm-cm
Injection Nominal Value (English) Nominal Value (SI)
Drying Temperature 300 °F 149 °C
Drying Time 3.0 hr 3.0 hr
Processing (Melt) Temp 710 to 720 °F 377 to 382 °C
Mold Temperature 300 to 450 °F 149 to 232 °C
Injection Pressure 15000 to 20000 psi 103 to 138 MPa
聚醚酮酮,PEKK RTP 4185是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|