聚醚酮酮,PEKK OXPEKK® Permetta™ Film SP是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
OXPEKK® Permetta™ Film SP
Polyetherketoneketone
Oxford Performance Materials, Inc.
Technical Data
Product Description
• Superior Electrical Properties
• Highly Formable Matrix
• High Tg
• Flame Retardant UL94 V-0 Rated
• OSU 65/65 Compliant
• Excellent Adhesive Performance
General
Material Status • Commercial: Active
Literature 1 • Technical Datasheet (English)
Availability • Europe • North America
Features • Amorphous • Good Adhesion • Good Processability
• Flame Retardant • Good Electrical Properties
Agency Ratings • OSU 65/65
Appearance • Amber
Forms • Preformed Parts
Physical Nominal Value (English) Nominal Value (SI) Test Method
Specific Gravity 1.28 1.28 g/cm³ ASTM D792
Melt Mass-Flow Rate (MFR) (380°C/8.4 kg) 35 to 45 g/10 min 35 to 45 g/10 min ASTM D1238
Molding Shrinkage - Flow < 5.0E-3 in/in < 0.50 % ASTM D955
Water Absorption (24 hr) < 0.20 % < 0.20 % ASTM D570
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus 500000 psi 3450 MPa ASTM D638
Tensile Strength ASTM D638
Break 3 1730 psi 11.9 MPa
Break 4 2590 psi 17.9 MPa
Break 13000 psi 89.6 MPa
Break 5 1010 psi 6.96 MPa
Break 6 1380 psi 9.51 MPa
Break 7 1520 psi 10.5 MPa
Tensile Elongation (Break) 80 % 80 % ASTM D638
Flexural Modulus 490000 psi 3380 MPa ASTM D790
Flexural Strength (Yield) 20000 psi 138 MPa ASTM D790
Compressive Strength 15000 psi 103 MPa ASTM D695
Coefficient of Friction ASTM D1894
vs. Itself - Static 0.29 0.29
Impact Nominal Value (English) Nominal Value (SI) Test Method
Notched Izod Impact 0.90 ft•lb/in 48 J/m ASTM D256
Hardness Nominal Value (English) Nominal Value (SI) Test Method
Rockwell Hardness (M-Scale) 86 86 ASTM D785
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Deflection Temperature Under Load ASTM D648
264 psi (1.8 MPa), Unannealed 286 °F 141 °C
Glass Transition Temperature 310 °F 154 °C DSC
Melting Temperature 577 °F 303 °C DSC
CLTE - Flow (< 310°F (< 154°C)) 4.3E-5 in/in/°F 7.7E-5 cm/cm/°C ASTM D696
Thermal Conductivity 1.8 Btu•in/hr/ft²/°F 0.25 W/m/K ASTM C177
OXPEKK® Permetta™ Film SP
Polyetherketoneketone
Oxford Performance Materials, Inc.
Electrical Nominal Value (English) Nominal Value (SI) Test Method
Surface Resistivity 2.0E+16 ohms 2.0E+16 ohms ASTM D257
Volume Resistivity 1.0E+16 ohms•cm 1.0E+16 ohms•cm ASTM D257
Dielectric Strength 1900 V/mil 75 kV/mm ASTM D149
Dielectric Constant (1 kHz) 2.10 2.10 ASTM D150
Dissipation Factor (1 kHz) 1.0E-3 1.0E-3 ASTM D150
Flammability Nominal Value (English) Nominal Value (SI) Test Method
Flame Rating V-0 V-0 UL 94
聚醚酮酮,PEKK OXPEKK® Permetta™ Film SP是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|