聚醚酮酮,PEKK Generic PEKK - Carbon Fiber是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
Generic PEKK - Carbon Fiber
Polyetherketoneketone
Generic
Technical Data
Product Description
This data represents typical values that have been calculated from all products classified as: Generic PEKK - Carbon Fiber
This information is provided for comparative purposes only.
General
Material Status • Commercial: Active
Availability • Africa & Middle East • Europe • North America
• Asia Pacific • Latin America
Filler / Reinforcement • Carbon Fiber
Physical Nominal Value (English) Nominal Value (SI) Test Method
Specific Gravity 1.35 to 1.47 1.35 to 1.47 g/cm³ ASTM D792
Molding Shrinkage - Flow (73°F (23°C)) 5.0E-4 to 1.0E-3 in/in 0.050 to 0.10 % ASTM D955
Water Absorption (73°F (23°C), 24 hr) 0.030 to 0.20 % 0.030 to 0.20 % ASTM D570
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus (73°F (23°C)) 160000 to 3.84E+6 psi 1100 to 26500 MPa ASTM D638
Tensile Elongation (Break, 73°F (23°C)) 1.0 to 2.5 % 1.0 to 2.5 % ASTM D638
Flexural Modulus (73°F (23°C)) 3550 to 4.50E+6 psi 24.5 to 31000 MPa ASTM D790
Compressive Strength (73°F (23°C)) 30500 to 35600 psi 210 to 245 MPa ASTM D695
Impact Nominal Value (English) Nominal Value (SI) Test Method
Notched Izod Impact (73°F (23°C)) 1.0 to 1.8 ft•lb/in 53 to 96 J/m ASTM D256
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Deflection Temperature Under Load ASTM D648
264 psi (1.8 MPa), Unannealed 596 to 625 °F 313 to 330 °C
Glass Transition Temperature 320 to 325 °F 160 to 163 °C DSC
聚醚酮酮,PEKK Generic PEKK - Carbon Fiber是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|